Manual Handling
Main law for this topic: Manual Handling Operations Regulations 1992.
Why manual handling matters
•HSE says manual handling causes most of the non-fatal injuries in construction.
•It can cause musculoskeletal disorders (MSDs) — injury or damage to the joints, back and other tissues of the arms and legs.
•Signs of an MSD include pain, aching, discomfort, numbness, tingling and swelling.
The law: avoid, assess, reduce
The Manual Handling Operations Regulations 1992 apply to lifting, lowering, carrying, pushing and pulling.
Your employer must
•Avoid manual handling that risks injury, so far as reasonably practicable.
•Where it can't be avoided, assess it and reduce the risk to the lowest level reasonably practicable.
•Give information on the weight of loads and which side is heaviest, where reasonably practicable.
You must
•Make full and proper use of any system of work your employer provides.
There is no "safe" weight
•HSE does not set weight limits. The risk depends on the Task, the Individual, the Load and the Environment — known as TILE.
Reducing the need to lift
•Use mechanical aids — conveyors, hoists, telehandlers, cranes, sack trucks, trolleys or pallet trucks. Lifting aids can be hired before buying.
•Have materials delivered close to where they will be used.
•Use pre-mixed mortar, a silo or concrete pumps instead of mixing by hand.
•Choose the lightest block that meets the design — most suitable blocks are under 20 kg. Two people lifting blocks over 20 kg is no longer recommended.
•Kerbs should not normally be lifted by hand. Use mechanical lifting, shorter lengths or handling aids — and designers should consider whether kerbs are needed at all.
•Two-person carrying of plasterboard is a last resort.
•Workers are well placed to spot handling problems and suggest fixes.
Good lifting technique
Good technique adds to other controls — it doesn't replace them.
•Plan the lift: where it's going, whether you need an aid or help, and clear the route.
•Get close. If you can't, slide the load towards you first.
•Feet apart, one leg slightly forward, ready to move your feet.
•Slightly bend your back, hips and knees at the start — don't stoop or fully squat.
•Keep the load close to your waist, heaviest side towards you. Hugging it can be better than gripping hard.
•Don't twist or lean sideways — turn by moving your feet.
•Keep your head up and look ahead once you have a secure hold.
•Move smoothly — don't jerk or snatch the load.
•Don't lift more than you can easily manage. Get help or an aid.
•To place a load exactly, put it down first, then slide it into position.
•For a long lift (floor to shoulder), rest it half way to change your grip.
•Tight clothing or unsuitable footwear can make a stable stance harder.
Pushing and pulling
•Steep slopes and rough or uneven ground increase the force needed to push or pull a load.
•Keep wheels and castors suitable and well maintained — poor wheels mean more force to start, stop and keep moving.
Sources
These notes are written in plain English from the law and official guidance below (checked November 2026).