Tools and Work Equipment
10 questions · Adaptive
How adaptive learning works
This session is built around you. Questions you find difficult will appear more often. Questions you have already mastered are shown less. The more you practise, the smarter your sessions become.
- → Get it right first time — +10 XP
- → Get it right after a hint — +5 XP
- → Every question has a full explanation
Tools and Work Equipment
35 questions in this chapter
Under PUWER, what counts as "work equipment"?
Answer: Any machinery, appliance, apparatus, tool or installation for use at work
Does PUWER apply to tools that workers bring in from home to use at work?
Answer: Yes — it includes equipment employees provide for their own use at work
Which of these does PUWER require of work equipment?
Answer: It is suitable for the job, maintained in a safe condition and inspected where needed
Who should be allowed to use work equipment, under PUWER?
Answer: Only people who have had adequate information, instruction and training
Which safety measures does HSE say work equipment normally needs?
Answer: Guarding and emergency stop devices
What is the first choice for protecting people from the dangerous moving parts of a machine?
Answer: Fixed guards enclosing the dangerous parts, where practicable
A guard on a machine slows down your work. Is it acceptable to remove it?
Answer: No — guards are there to stop access to dangerous parts and must not be bypassed
You notice a power tool is damaged. What does HSE say?
Answer: Never use faulty or damaged equipment — report it
Before maintenance is done on a machine, what should happen?
Answer: Moving parts should be stopped and the power isolated, and locked off if it could be switched back on
If a machine has a maintenance log, what does PUWER require?
Answer: It is kept up to date
Why does effective maintenance of work equipment improve safety?
Answer: Fewer breakdowns mean less dangerous contact with machinery, and faults are caught early
When must work equipment whose safety depends on how it is installed be inspected?
Answer: After installation and before first use, and after being assembled at a new site
Equipment that needs inspecting is being sent to another site. What must go with it?
Answer: Physical evidence that its last inspection was carried out
Which of these is an example of a job where external, industry-recognised training is commonly used?
Answer: Mounting abrasive wheels, or operating construction plant
Why does HSE stress training and close supervision for young workers using equipment?
Answer: Because of their relative immaturity and inexperience
What should happen to a power tool that is found to be damaged during an inspection?
Answer: It should be taken out of service until it is properly repaired
Under PUWER, what must an employer make sure about the jobs a piece of equipment is used for?
Answer: It is only used for operations and in conditions it is suitable for
When choosing work equipment, what does PUWER say the employer must take into account?
Answer: The working conditions and the risks in the place where it will be used
Under PUWER, what must training for equipment users cover?
Answer: The methods of use, the risks involved and the precautions to take
Does PUWER require training for people who supervise or manage the use of equipment, not just the users?
Answer: Yes — supervisors and managers must also have adequate training
Under PUWER, what should the information and instructions given to equipment users cover, where appropriate?
Answer: How and when it may be used, foreseeable abnormal situations, and lessons from experience
What does PUWER say about the instructions provided for using work equipment?
Answer: They must be easy for the people using them to understand
What should an emergency stop control do, compared with the normal stop control?
Answer: Work in priority to (override) the normal stop control
Under PUWER, a stop control must have priority over which other controls?
Answer: Any control that starts the equipment or changes how it is operating
What does PUWER say about the controls on work equipment?
Answer: They must be clearly visible and identifiable, and marked where needed
If an operator cannot see from the controls that nobody is in danger, what does PUWER say should happen before a machine starts?
Answer: A suitable warning, such as an audible or visible signal, is given
What does PUWER require of the means for isolating equipment from its power supply?
Answer: They must be clearly identifiable and readily accessible
Which of these is one of the hazards PUWER specifically requires protection against?
Answer: Articles or substances falling or being thrown out from the equipment
Under PUWER regulation 12, should protection against equipment hazards rely mainly on PPE and training?
Answer: No — so far as reasonably practicable, measures should go beyond PPE, training and supervision
What does PUWER say warning devices on equipment, such as alarms or lights, must be?
Answer: Unambiguous, easily noticed and easily understood
Must all work equipment have a formal, recorded inspection before every use?
Answer: No — the need is set by risk assessment, and a quick visual check before use is often enough
How long must the record of a PUWER inspection be kept?
Answer: At least until the next inspection of that equipment
Who can carry out a PUWER inspection of work equipment?
Answer: Someone with enough knowledge and experience of the equipment to know what to look for
Why does HSE say equipment used outdoors in harsh conditions may need inspecting more often?
Answer: Because it is likely to deteriorate faster than equipment used indoors
A hired-in machine needs regular inspection. How might you know its last inspection was done?
Answer: Physical evidence such as a report, tag, colour code or label