Skip to main content
14

Lifting Operations

Main law for this topic: LOLER 1998.

LOLER basics

The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) apply to anyone whose workers use lifting equipment, whether they own it or not.

•Every lift must be planned by a competent person, properly supervised and carried out safely.

•Lifting equipment includes accessories such as slings, chains, hooks and eyebolts.

•Equipment must be strong and stable enough for each load — and the load and anything attached must be strong enough too.

•It must be positioned to reduce the risk of hitting someone or the load falling.

•Simple pallet trucks that only lift a load just clear of the ground are covered by PUWER, not LOLER.

Marking and thorough examination

Marking

•Lifting equipment and accessories must be marked with their safe working load (SWL). Never exceed it.

•Equipment for lifting people must show how many people it can lift. Equipment not meant for people, but which could be used that way by mistake, must be marked as not for lifting people.

Thorough examination

•Equipment for lifting people, and lifting accessories: at least every 6 months.

•Other lifting equipment (such as a crane): at least every 12 months.

•Or under an examination scheme — and after anything exceptional that could affect safety.

•Only use certified equipment that isn't overdue for examination.

•A dangerous defect means it isn't used until fixed. Serious risks are reported to the enforcing authority.

•For hired cranes, the hire company usually arranges examinations, but the user must check they're done.

Carrying out a lift

•Use a responsible slinger or banksman and a recognised signalling system. Crane operators, slingers and signallers must be trained and competent.

•The crane supervisor must be able to stop a lift they think is dangerous.

•The lift plan (method statement) must be understood by everyone involved.

•The wider the angle between sling legs, the greater the load in each leg.

•For an unbalanced load, find its centre of gravity, lift it a few inches and pause.

•Use outriggers where needed.

•If you doubt the weight or whether the gear is up to it — don't lift.

•The main crane hazards are collapse and falling loads. A firm without the competence to plan a lift should use a contract lift.

Hoists and gin wheels

Hoists

•Must be marked as goods-only or passenger. Never ride on a goods-only hoist.

•Put up only by trained, experienced people following the manufacturer's instructions.

•Daily pre-use checks, and a formal inspection at least monthly.

•Landing gates stay closed except when loading or unloading.

•Loose materials go in secured containers, with loads spread evenly.

Gin wheels

•Fixed to a secure anchorage, with a proper hook or one with a safety catch — never bent rebar.

•A safe platform for loading the hook, and the safe working load marked.

Sources

These notes are written in plain English from the law and official guidance below (checked November 2026).