Skip to main content
6

Noise and Vibration

Main law for this topic: Control of Noise at Work Regulations 2005; Control of Vibration at Work Regulations 2005.

Noise: the warning signs

•If you have to raise your voice to talk to someone about 2 metres away, the noise may be harmful.

•Ringing or muffled hearing at the end of the day is a warning sign — even if it seems better next morning.

•Sudden very loud noises, for example from cartridge-operated tools, can also harm hearing.

•Hearing lost to noise never comes back.

•Tinnitus is ringing, whistling, buzzing or humming in the ears. It can be permanent and can lead to loss of sleep and depression.

The noise action values

From the Control of Noise at Work Regulations 2005 (daily or weekly personal exposure):

•Lower exposure action value: 80 dB(A) — employer must make hearing protection available on request.

•Upper exposure action value: 85 dB(A) — employer must provide hearing protection and set up hearing protection zones.

•Exposure limit value: 87 dB(A) — must not be exceeded.

•Peak sound pressure: 135 dB(C) lower, 137 dB(C) upper, 140 dB(C) limit.

A hearing protection zone is marked with signs, and nobody should enter without hearing protection.

Controlling noise

•The best way is to remove the noisy process or swap it for a quieter one — for example a block splitter instead of a cut-off saw, or plastic or rubber hammers instead of metal ones.

•Designers can remove noise, for example by designing ducts in instead of chasing channels into walls.

•Keep people away from noisy work — for example keep others out of the area around an excavator-mounted breaker.

•Compare tool noise data when buying or hiring.

•Relying on hearing protection alone is not acceptable. It is the last resort.

•Hearing protection should aim to get noise at the ear below 85 dB — too much protection cuts people off and they won't wear it.

•Employers should offer a choice of protectors and train workers in using them.

Your duties

•Wear the hearing protection you are given, properly, for all the noisy work.

•Report problems with it or with noise controls, and go to your hearing checks.

Hand-arm vibration (HAV)

Regular use of vibrating tools can damage the nerves, blood vessels and joints of the hand, wrist and arm — hand-arm vibration syndrome (HAVS).

•Common tools: concrete breakers, hammer drills, grinders, impact wrenches, needle scalers, sanders, chainsaws, strimmers.

•Holding work against a machine, such as a pedestal grinder, can also expose you.

•At particular risk: regular use of hammer-action tools for more than about 15 minutes a day, or some rotary tools for more than about an hour.

Early signs

•Tingling and numbness in the fingers (which can disturb sleep), loss of feeling and grip strength.

•In the cold and wet, fingertips going white, then red and painful as they warm up (vibration white finger).

•HAVS is preventable, but the damage is permanent. Report symptoms promptly.

Protect yourself

•Use low-vibration tools, keep cutting tools sharp, and break up tool use with other tasks.

•Don't grip or force the tool more than needed.

•Keep warm and dry, store tools so the handles aren't cold, stop or cut down smoking (it reduces blood flow), and massage your fingers at breaks.

Vibration action and limit values

From the Control of Vibration at Work Regulations 2005 (daily exposure, A(8)):

•Hand-arm: action value 2.5 m/s², limit value 5 m/s².

•Whole-body: action value 0.5 m/s², limit value 1.15 m/s².