Noise and Vibration
10 questions · Adaptive
How adaptive learning works
This session is built around you. Questions you find difficult will appear more often. Questions you have already mastered are shown less. The more you practise, the smarter your sessions become.
- → Get it right first time — +10 XP
- → Get it right after a hint — +5 XP
- → Every question has a full explanation
Noise and Vibration
40 questions in this chapter
Which simple sign suggests noise on site may be loud enough to damage your hearing?
Answer: You must raise your voice to talk to someone about 2 metres away
Your ears are ringing and your hearing feels muffled at the end of a shift. What does this suggest?
Answer: You may have been exposed to noise loud enough to damage your hearing
If noise at work damages your hearing, can it recover?
Answer: No — once you lose your hearing you can never get it back
What is tinnitus?
Answer: Ringing, whistling, buzzing or humming in the ears
What is the lower exposure action value for daily or weekly noise exposure?
Answer: 80 dB(A)
What is the upper exposure action value for daily or weekly noise exposure?
Answer: 85 dB(A)
What is the exposure limit value for daily or weekly noise exposure, which must not be exceeded?
Answer: 87 dB(A)
What is the peak sound pressure exposure limit value?
Answer: 140 dB(C)
At the lower exposure action value (80 dB(A)), what must your employer do about hearing protection?
Answer: Make hearing protection available to you if you ask for it
What is a hearing protection zone?
Answer: An area at or above 85 dB(A) that nobody enters without hearing protection
Is it acceptable to rely on hearing protection alone to control noise on site?
Answer: No — reduce the noise first; hearing protection is the last resort
According to HSE, what is the best way to manage noise on a construction site?
Answer: Get rid of the noisy process, or swap it for a quieter one
Why does HSE warn against giving workers hearing protection that blocks out too much noise?
Answer: It can cause isolation, so people may not want to wear it
An excavator-mounted breaker is being used nearby. What does HSE suggest to protect other workers?
Answer: Keep other people out of the area while the breaker is in use
What are your duties as a worker when it comes to noise?
Answer: Wear the protection you are given, report problems, attend hearing checks
Which of these is an employer's duty under the Control of Noise at Work Regulations?
Answer: Carry out health surveillance where there is a risk to health
Do you always have to measure noise with a meter to do a noise risk assessment on a construction site?
Answer: No — it can be done without measuring, e.g. using manufacturers' data
What is an early sign of hand-arm vibration syndrome (HAVS)?
Answer: Tingling and numbness in the fingers
In cold and wet weather, your fingertips go white, then red and painful as they warm up. What could this be a sign of?
Answer: Hand-arm vibration syndrome (vibration white finger)
Is the damage from hand-arm vibration syndrome permanent?
Answer: Yes — it can be prevented, but once the damage is done it is permanent
Which of these tools is a common cause of hand-arm vibration?
Answer: A concrete breaker
You think you have early signs of hand-arm vibration syndrome. What should you do?
Answer: Report it promptly to your employer or whoever does your health checks
Which of these helps keep blood flowing to your fingers when using vibrating tools?
Answer: Keeping warm and dry, and massaging and exercising your fingers in breaks
Why does smoking increase the risk from hand-arm vibration?
Answer: It reduces blood flow
What is the daily exposure action value for hand-arm vibration?
Answer: 2.5 m/s² A(8)
What is the daily exposure limit value for hand-arm vibration?
Answer: 5 m/s² A(8)
What are the daily exposure action and limit values for whole-body vibration?
Answer: 0.5 and 1.15 m/s² A(8)
Which tools does HSE give as an example of sudden, extremely loud noise that can harm hearing?
Answer: Cartridge tools
How can a designer help remove noise from the building work itself?
Answer: By designing ducts into the structure, so channels don't have to be chased into walls
What quieter alternative to a cut-off saw does HSE suggest for cutting blocks?
Answer: A block splitter
What does HSE suggest instead of metal hammers for freeing falsework leg collars, to cut noise?
Answer: Plastic or rubber hammers
What noise level at the ear should hearing protection aim for?
Answer: Below 85 dB
What does HSE say employers should do when providing hearing protection?
Answer: Offer a choice, and train people to use it
Which of these can noise-induced hearing loss cause?
Answer: Trouble following conversations
How can you compare how noisy different power tools are when buying or hiring them?
Answer: Use the maker's or supplier's noise data
How long using a hammer-action tool each day does HSE say is likely to put you above the vibration action value?
Answer: More than about 15 minutes
Which of these helps reduce your exposure to hand-arm vibration?
Answer: Keeping blades sharp and taking breaks from the tool
How should vibrating tools be stored, according to HSE?
Answer: So the handles are warm when next used
What does HSE suggest you do in breaks to help circulation if you use vibrating tools?
Answer: Massage your fingers
Can you be at risk of hand-arm vibration without holding a power tool?
Answer: Yes — e.g. holding work against a pedestal grinder