Skip to main content

πŸ“‹

Pipefitting Mock Test 13

50 questions Β· 45 minutes Β· Pass mark: 45/50

Other Tests
Questions in this test (50)View all β†’
1

Why can acetylene be dangerous even without air or oxygen present?

Fire Prevention and Control

2

A workmate collapses inside a manhole. Why should you not climb in after them without the planned rescue equipment?

Excavations and Confined Spaces

3

How should fragile rooflights be protected?

Working at Height

4

What must your employer tell you about first aid on site?

Accidents, Emergencies and First Aid

5

What must electrical equipment used in a flammable atmosphere be?

Fire Prevention and Control

6

What does the exclamation mark hazard pictogram mean?

Hazardous Substances and Dust

7

On larger projects, what system can help control the fire risk from hot work?

Fire Prevention and Control

8

What must be in place before anyone enters a confined space?

Excavations and Confined Spaces

9

Who should be allowed to drive a site dumper?

Site Vehicles and Mobile Plant

10

A guard on a machine slows down your work. Is it acceptable to remove it?

Tools and Work Equipment

11

Under PUWER, what must training for equipment users cover?

Tools and Work Equipment

12

A thorough examination finds a dangerous defect in a hoist. When can it be used again?

Lifting Operations

13

When must health and safety training required by the Management Regulations take place?

Legal Duties and Site Management

14

When should a safety harness have a pre-use check, and by whom?

Working at Height

15

Where should a spill kit be kept on site?

Environmental Awareness and Waste

16

When does the law require head protection on a construction site?

Personal Protective Equipment

17

What type of skin cleanser does HSE say should be used?

Health and Welfare

18

What is the minimum first aid provision on any workplace?

Accidents, Emergencies and First Aid

19

Why do tight-fitting masks need a face fit test?

Hazardous Substances and Dust

20

What document is needed for each load of non-hazardous waste that leaves your premises?

Environmental Awareness and Waste

21

For groundwork with wet cement, which footwear may give more protection than ordinary safety boots?

Personal Protective Equipment

22

Which regulations cover controlling the health risks from welding fume?

Hazardous Substances and Dust

23

What does CDM 2015 require at every loading bay?

Site Vehicles and Mobile Plant

24

How often should welding LEV be thoroughly examined and tested by a competent person?

Hazardous Substances and Dust

25

Which of these is covered by the COSHH Regulations?

Hazardous Substances and Dust

26

A task means pushing sideways while standing on a stepladder, and this cannot be avoided. What should be done?

Working at Height

27

Who usually carries out the fire risk assessment for a construction site?

Fire Prevention and Control

28

What is a worker's legal duty that relates to drugs and alcohol at work?

Health and Welfare

29

Which of these is the best way to reduce manual handling risk on site?

Manual Handling

30

A member of the public is hurt by falling materials from a site and is taken from the scene to hospital for treatment. Is this reportable?

Accidents, Emergencies and First Aid

31

Does the duty to control welding fume apply to workers who only weld now and then?

Hazardous Substances and Dust

32

Which of these is a business's responsibility for its waste?

Environmental Awareness and Waste

33

What are your two general duties as an employee under the Health and Safety at Work Act?

Legal Duties and Site Management

34

Where must an emergency route or exit lead?

Accidents, Emergencies and First Aid

35

Can a worker sleep inside a building that is under construction?

Fire Prevention and Control

36

What does an RCD (residual current device) do?

Electrical Safety

37

You turn up on a new site and are told to get straight to work without an induction. What should happen?

Safe Behaviour on Site

38

Which of these is listed by HSE as whole-body PPE?

Personal Protective Equipment

39

How should welding gas cylinders be stored?

Fire Prevention and Control

40

Who should take charge of attaching loads and signalling to the crane operator?

Lifting Operations

41

At the end of the working day, what should you do with oxy-fuel equipment?

Fire Prevention and Control

42

Which of these are visibility aids that can help a driver when reversing?

Site Vehicles and Mobile Plant

43

Why does HSE say construction sites should be kept secure, especially at night and at weekends?

Fire Prevention and Control

44

Which of these must the contractor make sure you are told about when you start work?

Safe Behaviour on Site

45

How should people nearby be protected from the UV light of arc welding?

Personal Protective Equipment

46

An acetylene cylinder involved in a flashback starts to feel warm or vibrate. What should you do?

Fire Prevention and Control

47

Where should you look when you are carrying a load?

Manual Handling

48

Does a confined space have to be small?

Excavations and Confined Spaces

49

Before the construction phase starts, what must be drawn up?

Legal Duties and Site Management

50

How big should wash basins on site be?

Health and Welfare