Skip to main content
9

Fire Prevention and Control

10 questions · Adaptive

How adaptive learning works

This session is built around you. Questions you find difficult will appear more often. Questions you have already mastered are shown less. The more you practise, the smarter your sessions become.

  • → Get it right first time — +10 XP
  • → Get it right after a hint — +5 XP
  • → Every question has a full explanation

Fire Prevention and Control

90 questions in this chapter

1

What three things are needed for a fire to start?

Answer: A source of ignition, a source of fuel, and oxygen

2

How can a fire start on site from something as small as a spark?

Answer: It only takes an ignition source, such as a small flame or electrical spark, together with air

3

Which of these is a hot work activity that can start a fire?

Answer: Welding or grinding

4

Which precautions does HSE list for hot work?

Answer: Clear combustible materials, have suitable extinguishers, and keep a careful watch throughout

5

On larger projects, what system can help manage the fire risk from hot work?

Answer: A permit to work system

6

Where should flammable materials such as LPG ideally be stored?

Answer: Outside the building under construction

7

Why does LPG need strict precautions when it is stored and used?

Answer: It has been involved in many serious fires and explosions, especially from leaks in confined areas

8

Why is good housekeeping important for fire safety on site?

Answer: Tidy sites have less rubbish and waste to act as fuel for a fire

9

Should bonfires be used to get rid of waste on site?

Answer: No — they should not normally be allowed on site

10

Can a worker sleep inside a building that is under construction?

Answer: No — no one should sleep in a building under construction or refurbishment

11

Who usually carries out the fire risk assessment for a construction site?

Answer: The responsible person — usually the main or principal contractor in control of the site

12

Where should escape routes on site lead to?

Answer: A safe place where people can assemble and be accounted for

13

What must be true of the fire warning on a construction site?

Answer: It must be audible above other noise and recognisable by everyone

14

Where should fire extinguishers be kept on a construction site?

Answer: At identified fire points around the site

15

Which type of extinguisher does HSE list for fires involving wood, paper and cloth?

Answer: Water

16

Which type of extinguisher does HSE list for electrical fires?

Answer: Carbon dioxide (CO2)

17

Which types of extinguisher does HSE list for flammable liquid fires?

Answer: Dry powder or foam

18

Who should be trained to use fire extinguishers on site?

Answer: Nominated people, so they know how to use them properly

19

What does CDM 2015 say about fire-fighting equipment and alarm systems on site?

Answer: They must be inspected, tested at suitable intervals and kept in good repair

20

What must happen before someone carries out work with a particular fire risk, such as hot work?

Answer: They must receive suitable instruction first

21

How should the site's smoking rules be handled?

Answer: Brought to the attention of all workers and visitors, and enforced

22

Who has legal duties to control fire risks on a construction project?

Answer: Clients, designers, principal designers and contractors

23

What does HSE say is the main purpose of fire extinguishers on a construction site?

Answer: To help people escape; trained people may tackle small, early fires

24

How does HSE say the amount of materials and waste kept on site should be managed to reduce fire risk?

Answer: Keep it to a minimum, stored in designated secure areas

25

Why does HSE say construction sites should be kept secure, especially at night and at weekends?

Answer: To help prevent fires on site

26

Can an old building be demolished by setting fire to it?

Answer: No — demolition by burning is not generally acceptable, as buildings contain materials that must not be burned

27

Which kind of site does HSE say may need a fixed, interconnected fire alarm system rather than relying on shouting?

Answer: High-risk or larger sites, such as timber-frame projects

28

Work is being done inside an occupied office building. What must the work not interfere with?

Answer: Existing escape routes, fire separation, alarms, dry risers or sprinklers

29

When should signs be provided for escape routes on site?

Answer: Where people are unfamiliar with the routes

30

Who does HSE list among the people at risk who must be considered in a site fire risk assessment?

Answer: Workers, contractors, visitors and vulnerable people

31

When should a site fire risk assessment be checked again?

Answer: Regularly, and whenever the site changes

32

Under CDM 2015, what must happen to the site's emergency arrangements once they are set up?

Answer: Everyone they cover must know about them, and they must be tested at suitable intervals

33

Which of these must emergency procedures on a construction site include?

Answer: Procedures for evacuating the site or any part of it

34

What does CDM 2015 say about emergency routes and exits, where needed?

Answer: They must be kept clear, marked with signs, and have emergency lighting where necessary

35

How must fire-fighting equipment that doesn't work automatically be placed on site?

Answer: Easily accessible, and marked with suitable signs

36

Regulation 29 of CDM 2015 requires steps to prevent injury from which risks?

Answer: Fire or explosion, flooding, and asphyxiating substances

37

What is fire-stopping?

Answer: A seal that closes gaps between building parts to restrict fire and smoke

38

What is a fire compartment in a building?

Answer: A part of the building built to stop fire spreading to or from other parts

39

You run a cable through a hole in a compartment wall. What must happen to the gap around it?

Answer: It must be sealed with suitable fire-stopping

40

Why does it matter if a hole for a service through a fire wall is not sealed?

Answer: Fire and smoke can spread through it into the next compartment

41

When a pipe passes through a fire-separating wall, how big should the opening be, if no tested sealing system is used?

Answer: As small as possible, with fire-stopping around the pipe

42

What does Approved Document B say a proprietary sealing system around a pipe must do?

Answer: Keep the fire resistance of the wall or floor

43

What is a cavity barrier?

Answer: Construction inside a hidden cavity that stops fire and smoke spreading through it

44

A fire door has a sign saying "Fire door keep shut". What does this mean?

Answer: Keep it closed when it is not being used

45

Why should you never wedge open a self-closing fire door?

Answer: It cannot close to stop fire and smoke spreading

46

Which device can legally hold a self-closing fire door open?

Answer: An automatic release linked to the fire alarm system

47

A fire door says "Automatic fire door keep clear". What does this tell you?

Answer: It is held open by a device that closes it in a fire, so keep the area clear

48

You need to cut a new hole through a compartment wall for your cables. What should you do first?

Answer: Get permission, and make sure it will be properly fire-stopped afterwards

49

What does the Building Safety Act 2022 call a building in England that is at least 18 metres high or has at least 7 storeys, with at least 2 homes?

Answer: A higher-risk building

50

What height makes a block of flats in England a higher-risk building under the Building Safety Act 2022?

Answer: At least 18 metres

51

Who is the building control authority for higher-risk buildings in England?

Answer: The Building Safety Regulator

52

Since January 2026, what kind of organisation is the Building Safety Regulator?

Answer: A standalone body, no longer part of HSE

53

Which disaster led to the Building Safety Act 2022 and the Building Safety Regulator?

Answer: The Grenfell Tower fire

54

Your cables pass through a wall that already has fire-stopping. You have to remove some to fit them. What must happen?

Answer: The fire-stopping is put back properly with suitable products

55

Which of these is a fire-separating element in a building?

Answer: A compartment wall or compartment floor

56

What does fire-stopping delay, as well as the spread of fire?

Answer: The spread of smoke

57

Which kinds of work does HSE count as hot work that can start a fire?

Answer: Any work that makes heat, sparks or flame, such as using a blow torch

58

Before soldering with a blow torch, what should you do with nearby combustible materials?

Answer: Clear them away from the area

59

What should you have close by when doing hot work?

Answer: A suitable fire extinguisher

60

On larger projects, what system can help control the fire risk from hot work?

Answer: A permit to work system

61

In a 2026 HSE case, a roof caught fire during a heat pump job. What did sparks from welding ignite?

Answer: Uncovered rigid foam insulation

62

Why does HSE say LPG needs strict precautions on site?

Answer: Leaks, especially in confined areas, have caused serious fires and explosions

63

Where does HSE say LPG and other flammable materials should be stored, where possible?

Answer: Outside the building under construction

64

If flammable liquids or gases have to be kept inside a building, what does HSE advise?

Answer: Keep only small amounts in the work area until they are needed

65

What must electrical equipment used in a flammable atmosphere be?

Answer: Suitable for that type and extent of flammable atmosphere

66

How should welding gas cylinders be stored?

Answer: Upright, chained to a rack or trolley, preferably outdoors

67

Where should flashback arrestors be fitted on oxy-fuel equipment?

Answer: Near the regulator on both the fuel and oxygen supplies

68

How should you test oxy-fuel hoses and connections for leaks?

Answer: With leak-testing fluid, never a flame

69

What must never be put on oxygen fittings?

Answer: Grease, oil or other lubricants

70

At the end of the working day, what should you do with oxy-fuel equipment?

Answer: Shut off cylinder valves, purge the hoses and close the blowpipe valves

71

An acetylene cylinder involved in a flashback starts to feel warm or vibrate. What should you do?

Answer: Evacuate the area and call the Fire and Rescue Service

72

How large an area does HSE say to evacuate around a heated acetylene cylinder?

Answer: 200 metres

73

Why can acetylene be dangerous even without air or oxygen present?

Answer: It can decompose explosively on its own

74

What colour are compressed acetylene cylinders?

Answer: Maroon

75

Where possible, which fuel gas does HSE suggest using instead of acetylene?

Answer: Propane

76

What should happen to faulty hoses, gauges or regulators?

Answer: Withdraw them and label them clearly as not for use

77

Why must you never weld or heat a container that may hold flammable residues?

Answer: The residues can ignite or explode

78

Why is a flammable gas release more dangerous in an enclosed space than outdoors?

Answer: An ignition is more likely to cause an explosion than a fire

79

Why does HSE warn about the out-of-hours risk in rooms with flammable gas plant?

Answer: Ventilation may be shut down, letting leaks build up

80

What does Approved Document B say ductwork must not do in a fire?

Answer: Help to transfer fire and smoke through the building

81

Air handling ducts pass through a fire-separating wall. What must be maintained?

Answer: The fire performance of the wall

82

Which of these is one of the four methods Approved Document B gives for ducts through fire-separating elements?

Answer: Thermally activated fire dampers

83

Why should thermally activated fire dampers not be used in kitchen extract ductwork?

Answer: Grease build-up can stop the dampers working properly

84

Why should thermally activated dampers not be used for extract ducts through protected escape routes?

Answer: Large amounts of smoke can pass before the heat triggers them

85

What should operate a fire and smoke damper where ductwork enters a protected escape route?

Answer: A smoke detector or suitable fire detection system

86

Can ventilation ducts serving a protected stairway also serve other areas?

Answer: No, each protected stairway needs its own ventilation system

87

Where a duct passes through a stair enclosure, what should the joint between them have?

Answer: Fire-stopping

88

Where should welding gas hoses be kept during work?

Answer: Away from risks of damage, such as traffic routes

89

Why should charged hoses not be left for long periods in poorly ventilated areas?

Answer: Leaking gas could build up to a dangerous level

90

Before hot work near a vehicle or panel, why should you check cavities for plastic foam?

Answer: Foam ignites easily, so remove it or use a heat shield