Skip to main content
Electrical Safety

A site cable crosses a roadway used by vehicles. How should it be laid?

AStraight across the road surface, covered with a thick rubber mat to protect it
BLoose across the road, as long as all the drivers are told to slow down
CTaped to the road surface with bright yellow and black warning tape
DIn a duct at least 0.5 m below the surface, with a marker at each end ✓

Answer & explanation

The correct answer is In a duct at least 0.5 m below the surface, with a marker at each end.

HSG141 says cables crossing a roadway go in ducts with a cable marker at each end. If vehicles use the road, the ducts should be at least 0.5 m below the surface.

This is one of 961 free CSCS test practice questions on Pass the Site Test. It is from the topic Electrical Safety and covers cables, numbers. Every question is our own, written from UK health and safety law and HSE guidance. Browse all questions or take a free mock test.

hardcablesnumbers

Test yourself on this topic

Earn XP and track your progress

Practice →

More questions on this topic