Fire Prevention and Control
Main law for this topic: Regulatory Reform (Fire Safety) Order 2005; CDM 2015.
How fires start
A fire needs three things: a source of ignition, fuel and oxygen.
•Ignition sources include heaters, lighting, naked flames, electrical equipment, hot work (welding, grinding), smoking materials and anything that gets very hot or sparks.
•Fuels include flammable liquids, wood, paper, plastic, foam, LPG, acetylene, packaging and waste.
•It only takes a small flame or spark, plus air.
Preventing fires
•Hot work: clear the area of combustible materials, have suitable extinguishers, and keep a careful watch throughout. On larger projects a permit to work helps control it. Anyone doing work with a particular fire risk must be instructed first.
•Store combustible materials, especially LPG, outside buildings under construction where possible. LPG has caused many serious fires and explosions.
•Keep the site tidy — rubbish is fuel. Keep stored materials and waste to a minimum, in secure areas.
•Bonfires should not normally be allowed. Demolition by burning is generally not acceptable — buildings contain asbestos, cables, plastics and foam.
•Secure the site, especially at night and weekends.
•Make sure everyone knows the smoking rules, and enforce them.
•Nobody should sleep in a building under construction or refurbishment.
Who is responsible
•Clients, designers, principal designers and contractors all have legal duties to control fire risks.
•The "responsible person" must carry out and keep up to date a fire risk assessment. On a construction site this is usually the main or principal contractor.
•The assessment must consider everyone at risk — workers, contractors, visitors and vulnerable people — and be reviewed as the site changes.
•CDM 2015 requires steps to prevent injury from fire or explosion, flooding, and substances that could cause asphyxiation.
Escape and raising the alarm
•Escape routes must be kept clear and lead to a safe place where people assemble and are accounted for.
•Signs are needed where people don't know the routes, and enclosed routes need lighting (emergency lighting where necessary).
•The fire warning can be an alarm, klaxon, air horn or whistle — but it must be heard above other noise and recognised by everyone. Larger or high-risk sites need a fixed, interconnected alarm system.
•Everyone must know the emergency arrangements, and they must be tested at suitable intervals.
•In occupied buildings, don't interfere with existing escape routes, fire doors and separation, alarms, dry risers or sprinklers.
Fire extinguishers
•Their main purpose is to help people escape. Trained people may tackle small fires in their early stages.
•Keep them at marked fire points, easy to reach, and have them checked and tested. Have extinguishers ready during hot work.
•Nominated people should be trained to use them.
Which extinguisher
•Water — wood, paper and cloth.
•Dry powder or foam — flammable liquids.
•Carbon dioxide (CO2) — electrical fires.
Sources
These notes are written in plain English from the law and official guidance below (checked November 2026).