Personal Protective Equipment
Main law for this topic: PPE at Work Regulations 1992 (as amended 2022).
When PPE is used
•PPE is for the risks that remain after other controls, such as engineering controls and safe systems of work. It is not the first choice.
•Where a risk is adequately controlled another, equally or more effective way, PPE isn't required.
•If a risk assessment shows PPE is needed, the employer must provide it free of charge. Since April 2022 this also covers "limb (b)" workers — casual or irregular workers.
What the law requires
Your employer must
•Provide PPE that suits the risk, fits you, and takes account of your health.
•Provide PPE for one person's use only where hygiene requires it.
•Keep it maintained — cleaned or replaced as needed — and provide somewhere to store it.
•Tell you what risks it protects against, how and why to use it, and how to look after it. Demonstrate how to wear it where appropriate.
You must
•Use PPE as you were trained and instructed.
•Return it to its storage after use.
•Report any loss or obvious defect straight away.
Head protection
•On almost all construction sites the law requires head protection.
•First, organise the work to reduce the risk — for example scaffolds with toe boards and brick guards.
•A damaged hard hat must be thrown away and replaced.
•It must fit, be worn properly, and not stop you wearing hearing protection when needed.
•Buy from a reputable supplier — counterfeit hard hats exist.
•Turban-wearing Sikhs are exempt from the law on safety helmets. The exemption covers head protection only — not other PPE.
Footwear, hi-vis and clothing
Footwear
•Steel toecaps (or equivalent) protect against dropped objects. Midsole protection protects against treading on nails.
•Some contractors ban rigger boots, as wearers are more prone to ankle sprains.
•Cement getting into boots has caused burns — wellingtons may protect better for wet-cement groundwork.
•If you can't wear basic safety footwear for medical reasons, your employer pays for a suitable alternative.
Hi-vis
•Wear it wherever vehicles or plant operate — including drivers when they get out of their cab.
•A tabard is often enough for routine site work. Traffic management work needs a long-sleeved hi-vis jacket and hi-vis trousers.
Clothing
•Follow the site rules — if shorts aren't allowed, don't wear them.
•Some trades keep skin covered for a reason — arc welding gives off UV light that damages skin.
Eyes, hands, lungs and body
•Eyes: hazards include chemical or metal splash, dust, projectiles, gas and vapour. Protection includes safety spectacles, goggles, face screens, face shields and visors.
•Hands and arms: gloves, gauntlets and arm sleeving, against cuts, abrasion, chemicals, temperature and impact.
•Lungs: respiratory protective equipment (RPE), from filtering masks to breathing apparatus.
•Whole body: harnesses, life jackets, overalls, aprons and chemical suits.
Sources
These notes are written in plain English from the law and official guidance below (checked November 2026).