Tools and Work Equipment
Main law for this topic: PUWER 1998.
PUWER: what it covers
The Provision and Use of Work Equipment Regulations 1998 (PUWER) cover any machinery, appliance, apparatus, tool or installation used at work — including tools workers bring from home.
Work equipment must be:
•Suitable for the job, and only used for jobs and conditions it is suitable for.
•Maintained in a safe condition, and inspected where needed.
•Fitted with suitable safety measures, such as guards and emergency stops.
•Used only by people who have had adequate information, instruction and training. Trainees may use it under supervision.
Guards and controls
**Guarding dangerous parts** — in this order:
•Fixed guards where practicable, then other guards or protection devices, then jigs, holders and push-sticks — all backed by information, training and supervision.
•Never remove or bypass a guard.
Controls
•Controls must be clearly visible and identifiable.
•The stop control must override any start control, and an emergency stop overrides the normal stop.
•Where the operator can't see that everyone is clear, a warning (sound or light) is given before starting. Warnings must be clear and easy to understand.
•The way to isolate equipment from its power must be easy to find and reach.
Training and information
•Users, and people who supervise or manage them, must be trained in how to use the equipment, the risks, and the precautions.
•Instructions must be easy to understand, and cover how and when it may be used and what to do if something goes wrong.
•External training is common for jobs such as mounting abrasive wheels or operating construction plant.
•Young workers need training and close supervision because of their relative inexperience.
Maintenance and inspection
•Never use faulty or damaged equipment — report it so it can be taken out of use. Don't make makeshift repairs.
•Before maintenance, stop moving parts and isolate the power. Lock off if it could be switched back on.
•Keep any maintenance log up to date.
•Inspection need is set by risk assessment. For many tools a quick visual check before use is enough.
•Equipment whose safety depends on installation must be inspected after installation and again after being set up at a new site.
•Equipment used outdoors in harsh conditions usually needs inspecting more often.
•Inspections are done by someone with enough knowledge and experience of the equipment. Records are kept until the next inspection.
•Hired equipment should come with evidence of its last inspection — a report, tag, colour code or label.
Sources
These notes are written in plain English from the law and official guidance below (checked November 2026).