Electrical Safety
Why should you never look into the end of an optical fibre?
AThe light in it can be strong enough to harm your eyes ✓
BThe cut end of the fibre can give you a bad electric shock
CGlass fibres always glow red-hot at the end when they are in use
DLooking at it will break the connection
Answer & explanation
The correct answer is The light in it can be strong enough to harm your eyes.
The ECS revision guide says laser, visible or infrared light used to test or run optical fibres can damage the eyes, or even cause blindness. HSE also warns that high-power lasers can blind.
This is one of 961 free CSCS test practice questions on Pass the Site Test. It is from the topic Electrical Safety and covers optical fibre, lasers. Every question is our own, written from UK health and safety law and HSE guidance. Browse all questions or take a free mock test.
easyoptical fibrelasers
Test yourself on this topic
Earn XP and track your progress
More questions on this topic
Why must small offcuts of optical fibre be put in a proper waste container?Three electricians are working on circuits from the same switched-off board. How should the isolator be kept off?On a building site, what colour are 110V leads, plugs and sockets usually?When you prove a circuit is dead, what do you check first?