Electrical Safety
When you prove a circuit is dead, what do you check first?
AThat all the lights and sockets in the room have stopped working
BThat there is no voltage at all between the line and the neutral
CThat your voltage detector works, using a proving unit or known live source ✓
DThat the circuit breaker label matches the drawing
Answer & explanation
The correct answer is That your voltage detector works, using a proving unit or known live source.
The ECS revision guide says the first step is to confirm the voltage detector works, on a proving device, a known live source or its built-in test. HSE also says the tester must be reliable.
This is one of 961 free CSCS test practice questions on Pass the Site Test. It is from the topic Electrical Safety and covers isolation, testing. Every question is our own, written from UK health and safety law and HSE guidance. Browse all questions or take a free mock test.
mediumisolationtesting
Test yourself on this topic
Earn XP and track your progress
More questions on this topic
Three electricians are working on circuits from the same switched-off board. How should the isolator be kept off?Is a non-contact "voltage stick" enough on its own to prove a circuit is dead?Why should you never look into the end of an optical fibre?Why must small offcuts of optical fibre be put in a proper waste container?